IC693PWR322E GE 24/48 VDC standard power supply

This IC693 PLC system DC input power supply is a 30-

watt supply designed for a 12 VDC nominal input. It will

accept an input range of 9.6 to 15.0 VDC. It mounts in a

standard power supply slot in any IC693 PLC baseplate.

This power supply provides three separate outputs:

  • +5VDC
  • +24VDC Relay Output for powering circuits on

IC693 Relay Output modules

  • +24VDC Isolated for powering Input modules
Category:
  • Email:cindy@justwellcenter.com
  • Phone:+86 13376981664
  • Whatsapp:+86 13376981664
  • Amy

Description

Brand:GE              number:IC693PWR322E

Colour:new                  Warranty: 12 months

Lead Time:3-day working day   Country of origin: USA

Price: Please contact us         Product weight:0.54kg

Product Dimensions:

  • The + and – wires from the 12 VDC power sourceconnect to the top two protected terminals on the powers

    supply terminal board. Connect the + wire to the top

    terminal and the – wire to the second terminal. A

    connection diagram is printed on the front of the power

    supply module next to the terminal board.

    Isolated 24 VDC Supply

    The bottom two terminal board terminals provide

    connections to the Isolated 24 VDC output. This output

    can be used to provide power for input circuits for 24

    VDC Input Modules (within the 15 watt limitation of this

    output). This is useful because power switched to input

    points must be supplied from a source external to the

    IC693 input modules.

    Wire Connection information

    • Each terminal can accept solid or stranded wires, but,

    if using two wires on one terminal, the wires should

    be the same size and type.

    • The suggested torque for the power supply terminal

    board screws is 12 in-lbs. (1.36 Nm).

    • Use one AWG #14 (2.1 mm2 ) or two AWG #16 (1.3

    mm2 ) copper conductors, rated for 75 degrees C (167

    degrees F) only, per terminal board terminal.

    Input Overvoltage Protection Devices

    The input overvoltage protection devices are connected

    internally to pin 4 of the terminal board. This pin is

    normally connected to pin 3 (frame ground) via a factory

    installed jumper strap. If a Hi-Pot test is to be performed

    on this supply, the jumper strap must be removed during

    the test so that the overvoltage protection devices are not

    damaged. After testing, replace the jumper strap to

    restore overvoltage protection during normal operation

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models:

GE DS200CPCAG1ABB
GE DS200FSAAG2ABA
GE DS200IQXSG1AAA
GE DS200LPPAG1AAA
GE DS200UDSAG1ADE
GE DS2020FECNRX025A
GE IS220PAICH1A
GE IS220PRTDH1A
GE PV2121ED160012CT
GE VME-MB-Z004
GE VMIACC5595-208
GE VMIVME-2510B
GE VMIVME-2540
GE VMIVME-3122
GE VMIVME-4140
GE VMIVME-5565
GE VMIVME-7750
GE VMIVME-7750-74000
GE 0207A1002-TPGA1
GE 0207A1008TPGB1
GE 0207A1102 TPAA1
GE 0207A1200TSUA1
GE 0207AI002TPGA
GE 03-1250-02
GE 04019J46G0001
GE 04019J47G0001
GE 04100AC6J110A
GE 0471L0303G001
GE 0471L0304G001
GE 0471L0350G001
GE 0517L0325AB
GE 0621L0101G001
GE 0621L0437-G001
GE 0621L0442-G001
GE 0621L0451-G001
GE 0621L0461-G001
GE 06B-0502-B002 #7008
GE 07556D26G0002
GE 0872D490G0003
GE 1006743-903
GE 101C473BA-1
GE 1023-P152A-SG608X
GE 104X109AD
GE 104X109AD102 2AG FUSE
GE 104X109AD103 2AG FUSE 1.0A
GE 104X109AD104 2AG FUSE
GE 104X125DC
GE 104X125DC015 DIODE MODULE
GE 104X905BA603 FACE PLATE
GE 105C9393-P2
GE 1151GE7K72B2
GE 115D2219G2
GE 115D2220G2
GE 115D2227G4
GE 115D2230G1
GE 115D2234G2
GE 115D2259G3
GE 115D2953G6
GE 117C1059G001
GE 117D6635G2

Additional information

Weight 0.1 kg
Dimensions 10 × 10 × 10 cm