IC660TBA106K GE FANUC

Description

IC660TBA106K GE Fanuc I/O Module

Product Dimensions：

Current-source Analog Output Blocks
June 2002 GFK-0691D
Description ___________________________________
Current Source Input Blocks are used to interface a controller to
devices that provide 4mA to 20mA analog signals. Two Currentsource
Input Blocks are available:

115VAC/125VDC Current-source Analog Input Block
(IC66*BBA106).

24/48VDC Current-source Analog Input Block
(IC66*BBA026).
These blocks are identical except for the power supply.
Current Source
Analog Input
(24 / 48 VDC
.7A Max)
Inputs: 24VDC
25mA
Features
Block features include:

Six 4-to-20 mA input circuits

Isolated channels

No user calibration required for operation

Software configurable

Advanced diagnostics

Dedicated Bus Switching Module control
A Current Source Input block has six 4-to-20mA current inputs.
Each input provides a 24 volt current loop power supply and is
isolated from all other circuits within the block. The BSM circuitry is
electrically common to Input 1, but isolated from the other inputs.
All circuits on the block support independent selection of linear
scaling values. These values can be used to convert the internal
values into engineering units suitable for the application.
Block diagnostics include:

low and high alarm reporting

overrange and underrange detection

open wire detection

internal fault reporting
A dedicated digital output is provided to drive a Bus Switching
Module (version IC66*BSM021 only).
Specifications _________________________________
Catalog Numbers
115 VAC/125 VDC Current
Source Analog Input Block IC66*BBA106
Terminal Assembly IC66*TBA106
Electronics Assembly IC66*EBA106
24/48 VDC Current Source
Analog Input Block IC66*BBA026
Terminal Assembly IC66*TBA026
Electronics Assembly IC66*EBA026
Block Specifications
Size (height x width x depth) 8.83” (22.44cm) x 3.56” (9.05cm)
x 4.42” (11.23cm)
Weight 4 lbs. (1.8 kg)
LEDs (I/O Block) Unit OK, I/O Enabled
BSM Control Switches one 24/48 VDC BSM (IC66*BSM021)
Block to Block Isolation 1500V for one minute
Group to Group Isolation 1500V RMS
Heat Dissipation 12 Watts maximum
Block Power (nominal); 115VAC 125VDC 24/4 VDC
Power supply voltage
Maximum current
Frequency/ripple
PS dropout time
98-132 VAC
250mA
47-63 Hz
1 cycle
105-145 VDC
140mA
10% max. ripple
10 ms min.
18-56
700mA
10% max. ripple
10ms min.
Input Specifications
Input accuracy at 25° C 0.1% of full scale reading *
Input resolution 1µA
Input conversion time 16.6ms to 400ms (user selectable)
Range 4mA to 20mA
Overrange capacity 0mA to 25mA
Input diagnostics Underrange, Overrange, High Alarm, Low Alarm,
Open Wire
Channel to channel isolation 1500V RMS
Thermal drift (from 25°C) 70 PPM per degree C typical
Input Impedance 100 Ohms +/-5%
Normal Mode Rejection -45dB at 50, 60Hz
Input Excitation Characteristics
Open circuit voltage 24VDC
Short circuit current <75mA
Loop impedance 1000 Ohms maximum (0mA to 20mA),
800 Ohms maximum (20mA to 25mA)
Environmental Specifications
Operating temperature 0° C to +60° C (+32° to +140° F)
Storage temperature -40° to +100° C (-40° to +212° F)
Humidity 5% to 95% (non-condensing)
Vibration 5-10 Hz 0.2” (5.08mm) displacement,
10-200 Hz at 1G
Refer to GFK-0867 for product standards and general specifications.
* In the presence of severe RF interference (IEC 801-3, 10 V/m),
accuracy may be degraded to +/-0.25% of full scale reading.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：