HSFP-03-3312M-22F HI-OPTEL SFP Optical Transceiver Module

Product Description (Detailed Explanation)

The HSFP-03-3312M-22F is a “hot-pluggable” optical module that converts electrical signals into optical signals (and vice versa). It follows the SFP Multi-Source Agreement (MSA), ensuring compatibility with a wide range of networking brands.

• Optical Core: It utilizes high-quality laser technology (typically DFB or FP depending on distance) to transmit data over single-mode or multi-mode fiber.

• Form Factor: The SFP design allows for high-port density on network switches, as the modules can be swapped or upgraded without powering down the entire system.

• Interface: It features a standard LC Duplex connector interface for fiber optic cable termination.

Product Parameters (Technical Specifications)

While specific internal revisions may vary, the “3312M” series generally adheres to the following industrial specifications:

Product Advantages (Key Benefits)

• Hot-Swappable: Can be inserted or removed from a switch port without interrupting the operation of other ports.

• High EMI Immunity: Since it transmits data via light pulses through glass fiber, it is completely immune to electromagnetic interference (EMI) and radio frequency interference (RFI), making it ideal for factory floors.

• Low Power Consumption: Engineered for high energy efficiency, which reduces the heat load on the host switch or controller.

• Long Distance Reach: Capable of transmitting data over kilometers, far exceeding the 100-meter limit of standard copper (RJ45) Ethernet cables.

• Cost-Effective: Provides a stable, industry-standard solution for 1.25G bandwidth requirements.

Precautions (Important Notes)

• Laser Safety: Do not look directly into the optical ports or the end of a connected fiber cable. The laser light is often infrared and invisible to the human eye but can cause permanent retinal damage.

• Dust Protection: Always keep the dust plugs installed on the LC ports when a fiber cable is not connected. Even microscopic dust particles can block the light path and cause signal loss (High attenuation).

• Fiber Matching: Ensure you are using the correct fiber type. A 1310nm SMF transceiver must be used with Single-Mode Fiber (usually yellow-jacketed). Using Multi-Mode Fiber will result in very short transmission distances and high error rates.

• Handle with Care: The internal optical alignment is extremely precise. Avoid dropping the module or subjecting it to heavy mechanical shock.

Product Applications (Typical Use Cases)

The HSFP-03-3312M-22F is used wherever high-speed, long-distance data transmission is required:

• Industrial Networking: Connecting Allen-Bradley Stratix, Siemens SCALANCE, or Moxa switches across a large manufacturing plant.

• Telecommunications: Serving as the interface for FTTH (Fiber to the Home) or metropolitan area networks.

• Data Centers: Linking servers to core switches within high-density rack environments.

• CCTV Surveillance: Transmitting high-definition IP camera feeds from remote outdoor locations back to a central monitoring room without signal degradation.

• Substation Automation: Providing interference-free communication in high-voltage electrical environments.