6ES7153-2BA01-0XB0 SIEMENS SIMATIC ET 200M Interface Module

Description

6ES7153-2BA01-0XB0 SIEMENS SIMATIC ET 200M Interface Module

Product Dimensions：

Product Description (Detailed Explanation)

The IM 153-2 High Feature (HF) is the premium interface module for the ET 200M system. It serves as the bridge between the PROFIBUS DP fieldbus and the internal backplane bus of the S7-300 modules. Unlike the “Standard” version, the “High Feature” model is specifically engineered for high-availability systems (S7-400H/FH) and complex process automation.

It supports redundant configurations, allowing two IM 153-2 modules to be mounted on a special redundant active bus module. If the primary communication link fails, the system switches to the standby module without interrupting the process. Additionally, it supports advanced functions like Time Stamping for precision event logging and Route Control for process engineering.

Product Parameters (Technical Specifications)

Product Advantages (Key Benefits)

• High Availability: Supports redundant PROFIBUS configurations, making it ideal for critical processes where communication failure is not an option.

• Precision Diagnostics: Integrated Time Stamping (1ms) allows for the exact sequence of events (SOE) to be recorded, which is essential for fault analysis in power plants and refineries.

• Hot Swapping: When used with active bus modules, I/O modules can be replaced while the station is under power and the bus is running.

• Extended Capacity: Supports up to 12 modules per rack, providing a higher I/O density compared to standard interface modules.

• Failsafe Integration: Fully compatible with PROFIsafe, allowing both standard and safety-related (F-modules) to be used in the same ET 200M station.

Precautions (Important Notes)

• Bus Termination: Ensure the PROFIBUS connector at the end of the segment has the terminating resistor switched to “ON.” Intermediate modules must be set to “OFF.”

• Active Bus Modules: To utilize “Hot Swapping” (Removal/Insertion under tension), you must use active bus modules (e.g., BM IM/IM or BM 2×40) rather than standard U-connectors.

• Address Setting: The PROFIBUS address is set via DIP switches behind the front door. Changes to the address only take effect after a power cycle of the module.

• Redundancy Rules: For redundant operation, both IM 153-2 modules must have identical firmware versions and hardware releases to ensure synchronous switching.

Product Applications (Typical Use Cases)

• Chemical & Petrochemical: Used in high-availability S7-400H systems to manage critical valves and sensors where a controller failure must not stop the process.

• Power Generation: Utilizing the 1ms Time Stamping feature to monitor circuit breakers and protection relays for millisecond-accurate event logging.

• Wastewater Treatment: Coordinating distributed I/O stations over long distances using PROFIBUS DP fiber optic or copper networks.

• Automotive Production: Integrating complex safety-related assembly cells using PROFIsafe modules within the ET 200M rack.

• Oil & Gas Pipelines: Remote I/O stations for monitoring pressure and flow rates across geographically dispersed locations.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：