2713P-T7WD1 A-B PanelView Plus 7 Performance

Description

2713P-T7WD1 A-B PanelView Plus 7 Performance

Product Dimensions：

Product Description

Technical Specifications

• Product Family: PanelView Plus 7 Performance
• Model Number: 2713P-T7WD1
• Display Size: 7 inches (diagonal)
• Display Type: Widescreen TFT LCD with LED backlight
• Resolution: 1024 x 600 pixels (WSVGA)
• Touch Technology: Projected Capacitive Multi-Touch (supports gesture control like pinch-to-zoom and swipe)
• Processor: High-performance ARM-based processor optimized for HMI applications
• Memory:
  • RAM: Typically 1 GB or higher (sufficient for complex graphics and data handling)
  • Flash Storage: Internal non-volatile memory for application storage and data logging (capacity varies by specific firmware/config, often 512MB to 1GB user accessible).
• Operating System: Linux (real-time capable)
• Communication Ports:
  • Ethernet: 2 x 10/100 Mbps Ethernet ports (RJ45) supporting EtherNet/IP, Modbus TCP, and other TCP/IP protocols. Supports device-level ring (DLR) if managed switch is used externally, though native DLR usually requires specific network modules in larger units; these ports support standard star topology.
  • Serial: 1 x RS-232/RS-485 isolated combo port (DB9M).
  • USB: 2 x USB 2.0 Type-A host ports (for peripherals like keyboards, mice, barcode scanners, or flash drives).
  • SD Card Slot: Supports SDHC cards for application transfer, data logging expansion, and firmware updates.
• Power Supply:
  • Input Voltage: 24V DC nominal (typically 19.2V to 30V DC).
  • Power Consumption: Approx. 10W – 15W (depending on brightness and peripheral usage).
  • Connection: Removable terminal block.
• Environmental Ratings:
  • Front Bezel: NEMA 4X, IP66, IP69K (when installed correctly).
  • Rear Housing: IP20.
  • Operating Temperature: 0°C to 50°C (32°F to 122°F) at full brightness; can operate up to 60°C with reduced brightness.
  • Storage Temperature: -20°C to 60°C (-4°F to 140°F).
  • Humidity: 5% to 95% non-condensing.
• Certifications: UL, cUL, CE, C-Tick, Ex (for hazardous locations when used with appropriate enclosures or specific certified models), Marine (ABS, DNV, etc., check specific certification list).
• Mounting: Panel mount (requires cutout in enclosure door). Includes mounting clamps.

Key Advantages

1. Modern User Experience: The projected capacitive multi-touch screen provides an intuitive, smartphone-like interface with support for gestures, improving operator efficiency and reducing training time.
2. High Performance: The Linux-based OS and powerful processor ensure fast boot times (seconds), rapid screen updates, and smooth animation even with complex graphics and large datasets.
3. Enhanced Security: Built-in cybersecurity features include user authentication, role-based access control, audit logs, and secure communication protocols (e.g., CIP Security readiness depending on firmware), helping meet IEC 62443 standards.
4. Connectivity Flexibility: Dual Ethernet ports allow for network segmentation (e.g., connecting to both a control network and an enterprise network) or daisy-chaining. Comprehensive protocol support (EtherNet/IP, Modbus TCP/RTU, OPC UA client/server capabilities via add-ons or native support in newer firmware) ensures interoperability.
5. Robust Design: Rugged construction with high ingress protection (IP66/IP69K front) makes it suitable for harsh industrial environments involving washdowns, dust, and vibrations.
6. Scalability & Integration: Part of the broader PanelView Plus 7 family, allowing easy migration from older models. Seamless integration with Logix controllers (ControlLogix, CompactLogix) and Studio 5000 ViewDesigner simplifies engineering and maintenance.
7. Data Management: Enhanced data logging capabilities to internal memory or SD cards, with easy export via USB or network for analysis and reporting.
8. Remote Access: Supports remote monitoring and diagnostics via VNC or web-based viewers (depending on configuration and security policies), facilitating troubleshooting without physical presence.

Important Considerations & Precautions

• Software Requirement: Application development requires Studio 5000 ViewDesigner software (version compatible with PanelView Plus 7). Older FactoryTalk View ME software versions may not support this terminal fully.
• Power Supply: Ensure a clean, regulated 24V DC power supply. Voltage spikes or drops outside the specified range can cause instability or damage. Proper grounding is essential.
• Installation: Must be mounted in an enclosure that provides the necessary environmental protection for the rear of the unit (IP20 rating). Follow torque specifications for mounting clamps and wiring terminals to ensure NEMA 4X/IP66 integrity.
• Touch Screen Sensitivity: While robust, projected capacitive screens can be affected by heavy gloves (unless specifically rated for glove use) or conductive contaminants. Clean the screen regularly with approved cleaning agents.
• Network Configuration: Dual Ethernet ports require careful network planning to avoid loops or IP conflicts. Configure IP addresses, subnets, and gateway settings correctly within the HMI project.
• SD Card Usage: Use industrial-grade, high-endurance SDHC cards. Improper removal of the SD card while writing data can corrupt files. Always use the “Safely Remove” function in the HMI OS if available before physical removal.
• Firmware Updates: Regularly check for firmware updates from Rockwell Automation to benefit from security patches, bug fixes, and new features. Follow the official update procedure strictly.
• Legacy Migration: When migrating from older PanelView Plus (Windows CE) terminals, note that the underlying OS is different (Linux vs. Windows CE). While migration tools exist, some ActiveX controls or specific legacy features may require modification or replacement.
• Ambient Light: Although bright, direct sunlight on the screen can reduce visibility. Consider shading or hooded enclosures for outdoor or very bright indoor installations.
• Documentation: Always refer to the latest Rockwell Automation Installation Instructions (Publication 2713P-IN001) and User Manual (Publication 2713P-UM001) for detailed wiring diagrams, dimensional drawings, and troubleshooting guides.

Typical Applications

• Machine-Level HMI: Serving as the primary operator interface for standalone machines or skids in packaging, material handling, food & beverage, and pharmaceutical industries.
• Process Monitoring: Displaying real-time process values, trends, and alarms in water/wastewater treatment, chemical processing, and oil & gas facilities.
• Batch Control: Managing batch recipes, execution, and reporting in industries requiring strict adherence to procedures (e.g., life sciences).
• System Diagnostics: Providing maintenance personnel with detailed diagnostic information, I/O status, and drive parameters for quick troubleshooting.
• Data Acquisition & Logging: Collecting production data, quality metrics, and energy consumption data for OEE calculations and historical analysis.
• Remote Operator Stations: Acting as a local view station in distributed control systems where the main controller is located remotely.
• Retrofit Projects: Upgrading old CRT or resistive touch HMIs to modern, secure, and high-performance interfaces without changing the underlying PLC logic significantly.

Shipping Port: Xiamen, China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Please make an inquiry for more models：